Date: 26/03/2025
Quick description: This is a simple and parametric T-maze designed with FreeCAD for laser cutting. The design is based on the following article: Robert M J Deacon & J Nicholas P Rawlins (2006). T-maze alternation in the rodent.
Date: 05/03/2025
Quick description: Connectors from paper "A 3D-printed microcapillary assembly for facile
double emulsion generation (Chiara Martino, Simon Berger, Robert C. R. Wootton and Andrew J. deMello)" were 3D printed with ABS filament with a 0.2mm nozzle filament 3D printer (0.06mm height layers).
Date: 21/11/2024
Quick description: The task requires the fabrication of a support made of aluminum and the creation of a liquid cell using Teflon and aluminum.
Date: 04/06/2024
Quick description: 3D printed in PLA.
Date: 24/04/2024
Quick description: Made with aluminium and 3D printed pieces in PLA.
Date: 25/03/2024
Quick description: 3D printed new adapters to fit plates on the Optoplate-96 device we made previously.
Date: 16/11/2023
Quick description: laser cut plate and 3D-printed adapters to create a z-stage for labteks plates.
Date.
Quick description.
Few pictures.
Links.
https://wiki.centuri-engineering.univ-amu.fr/en/techlab/mechatronics/openflexure
https://wiki.centuri-engineering.univ-amu.fr/en/techlab/mechatronics/syringe-drivers
https://wiki.centuri-engineering.univ-amu.fr/en/techlab/mechatronics/co2-cover
https://wiki.centuri-engineering.univ-amu.fr/en/techlab/mechatronics/lmt
https://wiki.centuri-engineering.univ-amu.fr/en/techlab/mechatronics/optoplate
https://wiki.centuri-engineering.univ-amu.fr/en/techlab/mechatronics/open-lab-frame